
See it in action
Clean. Press. Reverse.
Swipe for more →
The root problem
The backup camera sits where all the dirt flies.

It's mounted low on the back of the car, right in the spray from the road. Grit, salt and car-wash brushes wear the tiny lens, and every time you wipe it with a glove or a tissue you rub that grit across it. Over time the picture goes hazy and scratched, and you're back to turning round in your seat. A new camera can cost far more than you'd expect.
Give the lens a cover that's cheap to replace.
The protector is a small tempered-glass dome with an adhesive ring that sticks over the round camera housing. Grit and brushes meet the glass, not the lens, and you can wipe the dome clean without touching the camera itself. If the cover ever gets badly scratched, peel it off and fit a new one.
How it works
Clean. Press. Reverse.

Fits most round car cameras.
The dome is about 17.5 × 22.5 mm and 6.7 mm deep. It fits most rear, front and side-mirror cameras with a round housing. Measure yours before you order.

Wipe the cover, not the camera.
When road grime builds up, wipe the glass dome with a soft cloth. You're cleaning a replaceable cover instead of rubbing grit across the camera's own lens.

Built for rain, grit and car washes.
A tempered-glass dome with an anti-reflective, oil-resistant coating (supplier spec). Once the adhesive has set, it stays on through rain and car washes.
The part you'll notice
Reverse into the driveway and see it all on the screen.
The curb, the bin, the grandchildren's bikes. A clear picture you can trust, instead of a hazy screen that sends you twisting round in your seat.


Illustrative photos. A protector keeps a good lens clear; it can't repair a lens that's already scratched.
Get mineDo nothing, wipe the lens, or fit a cover?
| Glass cover | Wipe the bare lens | Do nothing | |
|---|---|---|---|
| Grit and brushes hit the cover, not the lens | ✓ | — | — |
| Safe to wipe often | ✓ | — | ✓ |
| Cheap to replace if scratched | ✓ | — | — |
| Picture stays clear | ✓ | Until it scratches | — |
Compared by method, not brand.
How to fit it
- Clean: wipe the camera housing with rubbing alcohol and let it dry completely.
- Peel: remove the backing from the adhesive ring without touching the sticky side.
- Centre: line the dome up over the lens so the rim sits evenly on the housing.
- Press: hold the rim firmly for 30 seconds, then let it set for 24 hours before a car wash or rain.
Fit it in dry weather above about 10 °C (50 °F) so the adhesive bonds well.
Made for
Every camera that helps you park.




Swipe for more →
Your pack
One for each camera on your car.
Every pack comes with the free Clear Camera card.
How to measure your camera, fit the cover so it bonds well, and keep the picture clear through rain, salt and car washes. Download it now, no email needed.
Download the PDF ↓- Free Clear Camera card with every pack
- One-time purchase. No subscription.
- Tracked delivery
Free shipping on orders $69+. Otherwise $7.99 to the US and $9.99 to the other countries we ship to. Orders are processed in 1-3 business days; delivery takes 5-10 business days to the US, 7-14 to Canada and 10-21 internationally, with tracking.
The honest part
A cover protects a good lens; it can't fix one that's already scratched or fogged inside. It's made for round camera housings about 17.5 mm across, so it won't fit flat, square or recessed cameras, or parking sensors and radar. Like any glass in front of a camera, it needs a wipe when it gets dirty, and a dirty cover blurs the picture just like a dirty lens. The adhesive is strong but needs a clean, dry surface and a day to set.
Questions people ask before buying
What's in the box?
1 camera lens protector (tempered glass dome with adhesive ring) per unit.
How big is it?
About 17.5 × 22.5 mm (0.69 × 0.89 in) and 6.7 mm (0.27 in) deep.
Will it fit my car?
It fits most round camera housings on the rear, front and side mirrors of cars, SUVs and pickups. Flat, square or deeply recessed cameras may not suit it. Send us a photo with a coin next to the camera if you're unsure.
Will it change the picture on my screen?
It's clear tempered glass with an anti-reflective coating, so the picture should look the same as a clean bare lens. Keep the dome clean for the clearest view.
Will it fix a blurry camera?
No. It protects a lens that's in good condition. If your picture is already scratched or fogged inside, the camera itself needs attention.
How do I fit it?
Clean the housing with rubbing alcohol, let it dry, peel the backing, centre it over the lens and press the rim for 30 seconds. Let it set for 24 hours before rain or a car wash.
Can it go through a car wash?
Yes, once the adhesive has set for 24 hours.
Can I take it off?
Yes. Warm it with a hair dryer and lift the rim with a fingernail or plastic card. Remove any leftover adhesive with rubbing alcohol.
What is it made of?
Tempered glass with an AB adhesive ring, according to the supplier.
How much is shipping?
Free on orders $69+. Otherwise $7.99 to the US and $9.99 everywhere else.
How long does delivery take?
Orders are processed in 1-3 business days. Delivery takes 5-10 business days to the US, 7-14 to Canada and 10-21 internationally, with tracking.
Can I return it?
We have a 30-day return policy. Items bought on sale can't be returned. To start a return, contact us at service@uncledoda.com.
Here before and after your order
A real question? Talk to us.
Not sure it fits your camera? Send us a photo of the camera with a coin or ruler next to it, plus your car model, and we'll tell you honestly.
service@uncledoda.comTwo ways this can go
Keep wiping grit across the camera lens, or let a glass cover take it.
Get my lens protectorFree shipping on orders $69+.